Simulation Flow through pipe

PART 1:- Single cyl DI add case 2 with discretization length 0.1 mm for intake runner and compare with default case 1 AIM:- To determine parameter such as torque, BSFC, max cylinder pressure and simulation time. MODEL:- CASE SETUP:- ENGINE PERFORMANCE PREDICTION:- KEY CYLINDER PREDICTIONS:- RUN TIME SUMMARY:- For…

1. Explore tutorial number 9 (FRM):- Fast Running Model (FRM), execute much more rapidly than the typical detailed GT-Power engine model, and are ideal for integrating with other vehicle system where an accurate and predictive engine plant model is desired and where computational speed is critical, FRM adpat to changing…

A. List down different TC and locate examples from GT Power Turbocharging:- In turbocharging, the supercharger is being driven by a gas turbine which use the energy in the exhaust gases. There is no mechanical linkage between the engine and the supercharger. The major parts of a turbocharger are turbine wheel, turbine…

1. Compare SI and CI Engine. S. I. Engine works on the Otto cycle whereas C.I Engine works on diseal cycle. In S.I. Engine air and fuel are mixed in a carburattor where as in C.I. Engine fuel is mixed with air inside the cylinder. S.I. Engine fuel ignited with an spark plug where as C.I. Engine ignition is achieved with…